Mitro’s Sound Factor
Yhteistyökumppani
NuForce IA-7 V2 saapuu tänään Tampereen putiikille.
NuForce IA-7 V2
Sisäänajo alkaa tänään, ja kotikuuntelujonoa on jo kertynyt.
Ilmoittaudu joukon jatkoksi, mikäli tämä ehdottoman läpinäkyvä, neutraali vahvistin kiinnostaa.
Viikon päästä laite on kypsä matkustelemaan.
NuForce IA-7 V2 specifications:
Power Output:
100W x 2 with 24,000uF of capacitance using 200W SMPS
325W peak power at 8 ohms.
Power Bandwidth: 100 to 20 kHz +/- 0.8 db; 10 Hz -0.5 db; 60 kHz -3 db
THD+N = 0.1%, 1kHz, 10W, 4 ohm load
Remote input selection and volume control with memory (last selection, volume level)
Digitally-controlled switched attenuator. Volume Range: +30dB to –70dB with 0.5dB steps
Audio Inputs:
4 sets of RCA inputs (1 set can be configured as pre-out)
Alternate configuration (available on black IA-7 only): 2 sets of RCA inputs, 1 3.5mm stereo input and 1 3.5 mm stereo pre-out
Audio Outputs:
1 set of RCA preamp output jacks (only 3 sets of RCA inputs are available if this is configured)
Speaker Binding Posts accept spade lugs or banana plugs
Chassis is 100% high-grade, brushed and anodized aluminum to reduce audio resonance
Dimensions: 1.75”H x 8.5”W x 16”D
Weight: 8.5 lbs.
Power Requirements: Worldwide 90-240VAC, auto select
-Mitro

NuForce IA-7 V2
Sisäänajo alkaa tänään, ja kotikuuntelujonoa on jo kertynyt.
Ilmoittaudu joukon jatkoksi, mikäli tämä ehdottoman läpinäkyvä, neutraali vahvistin kiinnostaa.
Viikon päästä laite on kypsä matkustelemaan.
NuForce IA-7 V2 specifications:
Power Output:
100W x 2 with 24,000uF of capacitance using 200W SMPS
325W peak power at 8 ohms.
Power Bandwidth: 100 to 20 kHz +/- 0.8 db; 10 Hz -0.5 db; 60 kHz -3 db
THD+N = 0.1%, 1kHz, 10W, 4 ohm load
Remote input selection and volume control with memory (last selection, volume level)
Digitally-controlled switched attenuator. Volume Range: +30dB to –70dB with 0.5dB steps
Audio Inputs:
4 sets of RCA inputs (1 set can be configured as pre-out)
Alternate configuration (available on black IA-7 only): 2 sets of RCA inputs, 1 3.5mm stereo input and 1 3.5 mm stereo pre-out
Audio Outputs:
1 set of RCA preamp output jacks (only 3 sets of RCA inputs are available if this is configured)
Speaker Binding Posts accept spade lugs or banana plugs
Chassis is 100% high-grade, brushed and anodized aluminum to reduce audio resonance
Dimensions: 1.75”H x 8.5”W x 16”D
Weight: 8.5 lbs.
Power Requirements: Worldwide 90-240VAC, auto select
-Mitro